For door and window construction, decorative panelling and many other joinery applications. Specifications • Shank Diameter: 1/4 • Dia Metric: 33.5 • Cut Length Metric: 9 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5...
Battery powered respirator for use with all woodworking applications. UK plug version for UK & Eire sale only. Assigned Protection Factor APF20, offering greater protection over APF10. Suitable for use when machining MDF. Approved to standard BS EN...
Straight two flute for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Ideal...
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by...
A self-guided combination trimmer. A 90 degree trim is obtained by engaging the bottom half. A 45 degree trim is obtained by lowering the cutter. A fine height adjuster is recommended when using this cutter. A larger 20mm bearing will spread the...
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our...
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications • Shank Diameter: 8 mm • Dia Metric: 41 • Cut Length Metric: 6.35 • Overall Length Metric: 75 • Bearing...
Use for producing mortar grooves and for bevelling applications. Specifications • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 22.5 • Overall Length Metric: 62.5 • Angle: 45
An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications • Shank Diameter: 1/2 • Dia Metric: 45 • Dia2 Metric: 24 • Cut Length Metric: 17 • Overall Length Metric: 60 • Radius 1...
Blades that can be rotated in 90 degree increments giving three extra new edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 12 • Overall Length Metric: 52 • Bearing Dia Metric: 19 • Angle:...
|
|