|
|
A self-guided combination trimmer. A 90 degree trim is obtained by engaging the bottom half. A 45 degree trim is obtained by lowering the cutter. A fine height adjuster is recommended when using this cutter. A larger 20mm bearing will spread the wear of the cutting when 45 degree trimming. Specifications • Shank Diameter: 1/4 • Dia Metric: 24 • Cut Length Metric: 6 • Overall Length Metric: 55 • Angle: 90
Price: £66.95 from Tooled Up
| Retailer | Price | |
|---|---|---|
| Tooled Up | £66.95 | Go to shop |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling....
Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 20 • Cut Length Metric: 14...
Roughing cutter which leaves an overhang of 3mm, for secondary final trimming. Life can be extended by varying height of cutter. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25.4...
|
|