StarNIC   V 1.3
 



 
Image of Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords
 

Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords

Saves money by delivering 30W of power + data up to 100 m through existing cabling. Extends power + data to any PoE or PoE+ device installed where no AC outlet is available. Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps). Quick and easy plug-and-play installation with no configuration necessary. Compact, hand-sized plastic housing ready for mounting on any smooth surface. Adds a PoE Device to Your LAN Without Adding a PoE Switch. Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.. Saves You Time and Money on Unnecessary Equipment Updates. This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.. Expands Your PoE Network Up to 100 Meters. The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.. Simple Plug-and-Play Installation Has Your Device Connected in Minutes. No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit to an outlet using the included power supply with the included UK or European power cords. LEDs indicate the unit is receiving power and is ready to transmit data.. Designed for Installation Almost Anywhere. Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.. Network. Networking standards. IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u. Cable types supported. Cat5, Cat5e, Cat6, Cat6a. Power over Ethernet (PoE). Yes. Ethernet LAN data rates. 10,100,1000 Mbit/s. Ethernet interface type. Gigabit Ethernet. Features. LED indicators. Yes. Product colour. Black. Ports & interfaces. Ethernet LAN (RJ-45) ports. 2. Power. Power consumption (typical). 30 W. Input current. 0.75 A. AC adapter output voltage. 53 V. AC adapter frequency. 50/60 Hz. AC adapter input voltage. 100 - 240 V. Power over Ethernet (PoE) voltage. 30 V. Certificates. Compliance certificates. CE, Federal Communications Commission (FCC), REACH, RoHS, WEEE. Sustainability. Sustainability compliance. Yes. Operational conditions. Storage relative humidity (H-H). 10 - 90%. Storage temperature (T-T). -20 - 80 °C. Operating relative humidity (H-H). 10 - 90%. Operating temperature (T-T). 0 - 50 °C. Weight & dimensions. Weight. 250 g. Packaging content. Manual. Yes. Power cord included. Yes. AC adapter included. Yes. Number of products included. 1 pc(s). Packaging data. Package type. Box. Package weight. 540 g. Package height. 88.9 mm. Package depth. 177.8 mm. Package width. 94 mm. Logistics data. Country of origin. China. Products per master (outer) case. 30 pc(s). Master (outer) case gross weight. 16.2 kg. Master (outer) case height. 294.6 mm. Master (outer) case length. 480.1 mm. Master (outer) case width. 368.3 mm. Master (outer) case GTIN (EAN/UPC). 10037332272017. Harmonized System (HS) code. 8504.40.9550. leaflet

Price: £51.99 from Back to the Office

Retailer Retailer Product Description Price  
Back to the Office Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords £51.99 Go to shop

Related Products

 
Image of Tripp Lite NPOE-EXT-2X1G30 2-Port Gigabit Ethernet PoE+ Extender/Repeater - Cat5e/6/6a, 95W, IP67, IK10, 328 ft. (100 m)
 

Tripp Lite NPOE-EXT-2X1G30 2-Port Gigabit Ethernet PoE+ Extender/Repeater - Cat5e/6/6a, 95W, IP67, IK10, 328 ft. (100 m)

Saves money by delivering 95W of power + data up to 328 ft. through existing cabling. Cascade up to 3 extenders to extend PoE connection up to 1,312 ft. total. Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps). IP67 rated to resist...

£141.99
More Information

 
Image of Tripp Lite P568-40M-FBR 4K HDMI Fiber Active Optical Cable (AOC) - 4K 60 Hz, HDR, 4:4:4 (M/M), 40 m (131 ft.)
 

Tripp Lite P568-40M-FBR 4K HDMI Fiber Active Optical Cable (AOC) - 4K 60 Hz, HDR, 4:4:4 (M/M), 40 m (131 ft.)

Supports UHD resolutions up to 4K (4:4:4) for crystal-clear video. Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy. Fiber optic strands transmit audio/video over longer distances than standard copper. Dispels EMI/RFI...

£216.77
More Information

 
Image of Tripp Lite N201-025-GY Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Gray, 25 ft. (7.62 m)
 

Tripp Lite N201-025-GY Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Gray, 25 ft. (7.62 m)

Premium cabling for Category 6, Category 5e and Category 5 applications—rated for 550 MHz/1Gbps communications. Designed to meet Category 6 specifications; reduces cross-talk and return loss. IEEE 802.3ab. PVC 4-pair solid UTP. All cables feature boots...





Online Shopping Price Comparison UK © StarNIC 2016 - 2025 All rights reserved.

Designated trademarks brands Logos and certain artworks used
on StarNIC.net are the property of their respective owners.