Tripp Lite B127A-4X2-BH2PH 4x2 HDMI over Cat6 Matrix Switch Kit, Switch/2x Pigtail Receivers - 4K 60 Hz, HDR, 4:4:4, PoC, 230 ft. (70.1 m), TAA

Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0. Switches between 4 source devices by manual push button or included IR remote. Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy. Power over Cable (PoC) technology provides power to receivers via Cat6 cable. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. HDMI Matrix Switch Kit Ideal for Digital Signage in Offices, Schools and Trade Shows. This HDMI matrix switch kit includes a quad-input switch and two pigtail-style receivers. It’s recommended for office buildings, schools, houses of worship, trade shows, meeting facilities, retail settings, hotels and other locations with video presentations or digital signage applications. The matrix switch and receivers extend 4K audio/video up to 230 feet (70.1 meters), making the kit ideal for areas where the four source devices and dual displays are farther apart than conventional cabling allows.. Extends a 4K A/V Transmission up to 230 ft....or Even Farther. The B127A-4X2-BH2PH allows video from any of four connected HDMI sources to display on two HDMI displays up to 230 feet away via user-supplied Cat6 cabling. You may select which video to display on which monitors by using the push button on the switch or the included IR remote control, which lets you operate the switch from the receiver end of the installation. By installing B127A-010-H signal repeaters (sold separately) between the switch and receivers, you can extend the signal up to 400 feet (121.9 meters) total per video output.. Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color. The B127A-4X2-BH2PH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with 36-bit Deep Color. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This switch kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.. Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks. After you connect the included external power supply to the switch, Power over Cable (PoC) technology powers the receivers over Cat6 cable. LEDs on both the switch and receivers will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers without the need for a nearby AC outlet.. Multi-Resolution Support Allows Mixing and Matching of Displays of Different Resolutions. Say you have a brand new 4K/60 Hz HDTV in the living room, but want to extend video from the source devices to the older 1080p TV in the kitchen or the 4K (at 30 Hz) monitor in your home office. The B127A-4X2-BH2PH is backward compatible with 4K/30 Hz and 1080p resolutions via automatic switching, allowing each connected monitor to display video at its maximum resolution.. Plug-and-Play Operation for Quick Setup and Immediate Use. The included matrix switch and receivers operate with no software required. The switch comes with detachable surface-mount brackets for mounting to a pole, rack or flat surface. Connect the switch to as many as four sources with user-supplied HDMI cables (such as P568- or P569-Series). Then, connect the pigtail receivers’ built-in HDMI plugs to the displays. Finally, connect the switch to the receivers with user-supplied Cat6 patch cable (such as N202-Series).. TAA-Compliant for GSA Schedule Purchases. The B127A-4X2-BH2PH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.. Ports & interfaces. DC-in jack. Yes. Consumer Electronics Control (CEC) support. Yes. Ethernet LAN (RJ-45) ports. 2. HDMI version. 2.0. Video out. 2x RJ-45. Video port type. HDMI. Video ports quantity. 4. Features. Certification. CCC; GS; LPS; PSE; RCM; TUV; UL; WEEE; cUL, RoHS; CE (Europe); REACH; FCC (USA). Plug and Play. Yes. LED indicators. Yes. Rack mounting. Yes. Maximum refresh rate. 60 Hz. Colour depth. 36 bit. 3D. Yes. HD type. 4K Ultra HD. Maximum resolution. 3840 x 2160 pixels. Housing material. Metal. Product colour. Black. Network. Cable types supported. Cat5, Cat5e, Cat6. Power. Output current. 1 A. Output voltage. 24 V. Input current. 1.5 A. AC input frequency. 50 - 60 Hz. AC input voltage. 100-240 V. Weight & dimensions. Height. 44 mm. Depth. 181 mm. Width. 440 mm. Packaging data. Package type. Box. Package weight. 3.9 kg. Package height. 55.1 mm. Package depth. 290.1 mm. Package width. 164.1 mm. Quantity per pack. 1 pc(s). Packaging content. Cables included. DC. Manual. Yes. Operational conditions. Storage relative humidity (H-H). 0 - 85%. Operating relative humidity (H-H). 0 - 85%. Storage temperature (T-T). -15 - 50 °C. Operating temperature (T-T). 0 - 40 °C. Sustainability. Sustainability compliance. Yes. Sustainability certificates. UL ECOLOGO. Technical details. Compliance certificates. CCC, CE, Federal Communications Commission (FCC), REACH, RoHS, WEEE. Logistics data. Country of origin. Taiwan. Products per master (outer) case. 1 pc(s). Master (outer) case gross weight. 3.9 kg. Master (outer) case height. 178.1 mm. Master (outer) case length. 310.9 mm. Master (outer) case width. 517.9 mm. Harmonized System (HS) code. 8525.50.3035. leaflet

Price: £454.99 from Back to the Office