|
|
Designed for use with a standard ratchet or breaker bar. Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications. Large LCD display with LED/audible alarm indicating achieved and target torque levels. Selectable readings in Nm, lb.ft, lb.in, kgf.cm or kgf.m and accurate to ±2% of stated capacity. Memory stores up to 50 readings and features auto-shut-off after 80 seconds. Supplied with certificate and storage case. Features & Benefits: • Designed for use with a standard ratchet or breaker bar. • Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications. • Large LCD display with LED/audible alarm indicating achieved and target torque levels. • Selectable readings in Nm, lb.ft, lb.in, kgf.cm or kgf.m and accurate to ±2% of stated capacity. • Memory stores up to 50 readings and features auto-shut-off after 80 seconds. • Supplied with certificate and storage case. • Lifetime guarantee*. • Model No. STW290 Specifications: Model No STW290 Angle Range: n/a Battery: 2 x AAA (supplied) Brand: Premier Drive: 1/2"Sq Length: 75mm Nett Weight: 0.21kg Range: 40-200Nm(29.5-147.5lb.ft, 354-1770lb.in, 4.08-20.38kgf.m, 408-2038kgf.cm)
Price: £70.95 from Tooled Up
| Retailer | Price | |
|---|---|---|
| Tooled Up | £70.95 | Go to shop |
Designed for use with a standard ratchet or breaker bar. Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications. Large LCD display with LED/audible alarm indicating achieved and target torque levels. Selectable...
Rugged and resilient digital torque wrench suitable for workshop and factory use. LCD read-out with LED, vibration and audible alarms to indicate achieved and target torque levels. Features angle mode, eliminating the need for angle gauges and protractors...
Heat treated and hardened with a fully polished mirror finish. Chrome Vanadium steel 3/8"Sq Drive x 12-Point WallDrive® rings. Minimum/maximum length: 65/70mm. Ideal for use with torque wrenches (please note: a setting adjustment is required to compensate...
|
|