|
|
Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. • Model No. PT1000 Specifications: Model No PT1000 Brand: Sealey Nett Weight: 12kg Capacity: 1000kg Test Load: 1500kg Track Width Adjustable Range: 64-140mm Minimum Curve Radius: 1000mm A: 255mm B: 127.5mm C: 127.5mm D: 104mm E: 128mm Weight: 13kg Minimum Standard I-Beam Dimensions (D x W x Web): 125 x 75 x 5.5mm Maximum Distance Between Spans: 2500mm Maximum Standard I-Beam Dimensions (D x W x Web): 250 x 125 x 7.5mm Maximum Distance Between Spans: 6000mm Refer to catalogue for diagram:
Price: £125.95 from Tooled Up
| Retailer | Price | |
|---|---|---|
| Tooled Up | £125.95 | Go to shop |
Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling....
Designed to support and assist to accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beams supported on rubber...
Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral...
|
|