|
|

RUST-OLEUM® Hard Hat Aerosol Topcoats 2166 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Traffic RedPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Price: £17.95 from Tooled Up
| Retailer | Price | |
|---|---|---|
| Tooled Up | £17.95 | Go to shop |
RUST-OLEUM® Hard Hat Aerosol Topcoats 2144 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared...
RUST-OLEUM® Hard Hat Aerosol Topcoats 2169 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be used on new, bare or slightly rusted steel surfaces.Intended to be applied...
RUST-OLEUM® Hard Hat Aerosol Topcoats 2189 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be used on new, bare or slightly rusted steel surfaces.Intended to be applied...
|
|