|
|
RUST-OLEUM® Hard Hat Aerosol Zinc Spray Cold Galvanising Compound 2185 is a fast drying zinc rich primer based on an epoxy ester resin. The product contains pure zinc as pigment and provides cathodic protection.Recommended Uses:Should be used on new, bare steel or galvanised steel surfaces.Intended to be applied on small areas or for touch up.Can be recoated with non-saponifiable coatings.Should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.SpecificationsSize: 500 mlAppearance: FlatColour: GreyPropellant: Dimethyl ether Recommended film thickness: 35 µm dry, equals averagely 100 µm wet VOC-content: 630 g/l Drying times:20°C/50% r.v:To touch: 10 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness: 7 days Heat resistance: 450°C (dry heat)Coverage: Theoretical: 1.4 m² per spray can at 35 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Price: £20.95 from Tooled Up
| Retailer | Price | |
|---|---|---|
| Tooled Up | £20.95 | Go to shop |
RUST-OLEUM® Hard Hat Aerosol Zinc Spray Cold Galvanising Compound 2185 is a fast drying zinc rich primer based on an epoxy ester resin. The product contains pure zinc as pigment and provides cathodic protection.Recommended Uses:Should be used on new,...
RUST-OLEUM® Hard Hat Aerosols Zinc Aluminium Spray Bright Galvanizing 2117 is a fast drying zinc rich primer/topcoat based on an epoxy ester resin. The product contains pure zinc and aluminium as pigment and provides cathodic protection. Recommended...
RUST-OLEUM® Hard Hat Aerosols Fluorescent Topcoats 2200 Series are based on a fast drying acrylic resin. The products are based on special fluorescent pigments and are lead- and chromate free.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat...
|
|