|
|

The new Phlotich Pulley is available fitted with bushings or bearings. Profiled side plates capture the host line, allowing for a reduction in host line movement Sideplates mate perfectly parallel allowing for a 'clean' connection to the anchoring Karabiners. The mated sideplates also allow for seamless use of a 'Twin Leg' Tether in SRT climbing with a Rope Wrench. This reduces clutter and allows proper alignment of the hitch, pulley and tether on the anchoring Karabiner (in a Rope Wrench set up) Lower anchor aperture will allow for full Karabiner rotation Dual Karabiner Alignment- when used with Doubled Rope Climbing, the Phlotich allows the two anchoring Karabiners to be aligned efficiently on one pulley, instead of separating to two separate anchors Unique 'Kidney' aperture: allows for a wide variety of Karabiner connector shapes and will allow rotation of any Karabiner allows for multiple Karabiner connections at one time allows for a Karabiner to 'centre' itself depending on where the load is applied- and allows Karabiners to 'self centre' during climbing manoeuvers, which is helpful with DdRT climbing when climbing up to a 'large limb' allows for a perfect spot to anchor a 'Sternal' anchoring device (Karabiner, hook, Chestie, etc.) for use in SRT climbing on ascent with a Rope Wrench. This connector in the 'Kidney' aperture will self align to the most efficient spot and can be removed and attached easily allow the efficient use of the Pulley as a 'trolley' and allows for self alignment of an anchoring Karabiner in the 'Kidney' aperture when used in this configuration. The Phlotich can be used effectively for 'Double Crotching' or setting up efficient mechanical advantage systems due to the multiple attachment points and the ability for multiple Karabiners anchored in the 'Kidney' aperture. Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.
Price: £57.80 from Rope Master UK
| Retailer | Price | |
|---|---|---|
| Rope Master UK | £57.80 | Go to shop |
All Pulleys in our latest Heavy-duty Prussik range have tamper-proof Rivets, in compliance with CE EN12278 (2007) & NFPA (1983)* These Pulleys are available in Aluminium or Stainless Steel, with Bushings or Roller Bearings. Bushings are ideal for...
Pulleys in the new Prussik range have fully load-rated Beckets, which are large enough to allow a Karabiner to rotate fully. Compatible with rope diameter (mm) max 13mm (1/2") Wheel material Aluminium Weight (grams) 500 Weight (ounces) ...
Pulleys in the new Prussik range have fully load-rated Beckets, which are large enough to allow a Karabiner to rotate fully. Compatible with rope diameter (mm) max 13mm (1/2") (MBS) Minimum Breaking Strength (kN) 50 Wheel material Aluminium...
|
|