|
|

Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. Single-rank. On-board I2 serial presence-detect (SPD) EEPROM. 8 internal banks; 2 groups of 4 banks each. Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS). Selectable BC4 or BL8 on-the-fly (OTF). Fly-by topology. Terminated control command and address bus. RoHS Compliant and Halogen-Free. ValueRAM's KVR32N22S6/4 is a 512M x 64-bit (4GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.. Features. JEDEC standard. Yes. Lead plating. Gold. Country of origin. Taiwan. Programming power voltage (VPP). 2.5 V. Row active time. 32 ns. Refresh row cycle time. 350 ns. Row cycle time. 45.75 ns. Module configuration. 512M x 64. Memory voltage. 1.2 V. Memory ranking. 1. CAS latency. 22. ECC. No. Memory form factor. 288-pin DIMM. Component for. PC/Server. Memory clock speed. 3200 MHz. Internal memory type. DDR4. Memory layout (modules x size). 1 x 4 GB. Internal memory. 4 GB. Buffered memory type. Unregistered (unbuffered). Operational conditions. Storage temperature (T-T). -55 - 100 °C. Operating temperature (T-T). 0 - 85 °C. General. Product family. ValueRAM. Technical details. Compliance certificates. RoHS. Sustainability. Doesn't contain. Halogen. Weight & dimensions. Height. 31.2 mm. Width. 133.3 mm. Logistics data. Harmonized System (HS) code. 84733020. leaflet
Price: £26.99 from Back to the Office
| Retailer | Price | |
|---|---|---|
| Back to the Office | £26.99 | Go to shop |
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. Dual-rank. On-board I2 serial presence-detect (SPD)...
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. Dual-rank. On-board I2 serial presence-detect (SPD)...
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. Single-rank. On-board I2 serial presence-detect (SPD)...
|
|