High grade silicon rubber weatherseal. Withstand temperature of -30 degrees to +200 degreesC. Recessed using a small 1/4 inch shank hand router. Can be slid or tucked in from the top face. Compresses to approx. 3.5mm. Groove depth shou...
1/4 inch collet capacity. Dimensions: "Hitachi TR12, M12V, M12SA" Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices exclu...
Aquamac 63 strip is fitted into the frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone mas...
Compared to dowelling, biscuit jointing is faster and more precise. Made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand when in contact with a woodworking adhesive, e.g. PVA glue. Dimensions:<...
Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing washers. Dimensions: Outside diameter - 30mm<...
Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing washers. Dimensions: Outside diameter - 25mm<...
Allows a rounded recess in wood to be cut to a square recess with the use of a hammer. Ideal for squaring hinge recesses in door frames and door edges. Can be used the the Trend Hinge Jig. Dimensions: Length = 70mm Width = 29mm Pl...
Hard wearing carry cases to protect and allow for ease of carrying of the Trend COMBI65. Dimensions: Handle & velcro lip Length = 945mm Height = 255mm Please note that prices in the Trend Catalogue download, if shown below, may...
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions: Shank ID - 6mm Collet O...
The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter´s shank. Dimensions: Precision multi-slit one piece 3mm collet Please note that prices in the Trend Catalogue download, if shown belo...
|
|