Expert Quality , for semi-permanent attachment to steel RSJ´s to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate incl...
All steel construction with foot operated, integral hydraulic pump and ram assembly. Fitted with platform safety lock device to prevent accidental lowering. Bike fixed by front wheel clamp, in addition, four eyelets allow tie downs to be used for add...
Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-p...
Spring loaded flat arms with roller bearings for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP. Capacity: 2tonne...
Aluminium tubular frame design, with anti-slip rubber top, offers great strength to weight ratio. Height: 430mm Maximum Capacity: 200kg...
Designed to safely support the gearbox on removal and installation from the vehicle. Adjustable saddle gives fine adjustment when aligning the gearbox to the engine. Suitable for any vertical transmission jack with a 30mm diameter shaft. Ideally suit...
Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European ...
Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate sur...
This compact jack features an innovative mechanical locking mechanism which improves safety for users. The mechanical locking system supports the vehicles weight, locking into place maintaining the lift height, giving the product its main advantage ...
Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 86mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-p...
|
|