Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Dimensions: Diameter: 15.9mm Cutting Length: 15.9mm Bearing Diameter: 15.9mm Shan...
This trimmer with a shank mounted bearing, are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Dimensions: Diameter: 19.1mm Cutting Length: 25.4mm Shank D...
For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: Diameter: 12.7mm Cutting Length: 9mm Cutting Radius: 4.8mm Shank Diameter: 8mm Please note that prices in the Trend Catalogue d...
Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Dimensions: Cutting Length: 7mm Bearing Diameter: 9.5mm Angle: 30 degrees Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue downl...
Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. For use in a router table only Timber thickness are M...
For use in a router table only. Take 3 - 4 passes at repeated depths. Can be used for curved panels if a copy pin is used. Dimensions: Diameter: 41mm D2=7mm Cutting Length: 7mm Cutting Radius: 12mm Shank Diameter: 8mm
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. For use in a router table only Timber thickness are M...
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Timber thickness are Min. = 15mm and Max. = 18mm. Dimensions: Diameter: 41 mm Bearing Diameter: 22 mm Shank Diameter: ...
This dovetail cutter produces a tight reliable joint for drawers, boxes etc. For use with Elu/Dewalt & Titan (11mm comb). Use with GB108. Dimensions: Diameter: 14.3 mm Cutting Length: 12.7 mm Overall Length: 52 mm Angle: 104 ...
|
|