Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.. Dimensions: Overall Length: 83 mm Shank Diameter: 3/8 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the ...
Slotters with M12x1.0. threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor enables 12mm bore guide bearings to be fitted...
Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters, touching the tips of the slott...
Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters, touching the tips of the slott...
Designed to accommodate the Schlegel Aquamac 63 weather strip system. Allows for a particularly small gap between sash and frame. The slot can be positioned part way down the side of the rebate, or at the bottom of the rebate. The Recessin...
Designed to accommodate Schlegel Smokeseal Quick Fit brush strips. The groove is cut in the door edge rather than the frame. Comes complete with a guide bearing to reduce setting-up time. Side fence is not required. Dimensions: ...
A one piece set. Parts are inter-changed on the arbor to alter the set-up. Dimensions: Diameter: 41mm Bearing Diameter: 22mm Max Thickness 22mm. Shank Diameter: 8mm Please note that prices in the Trend Catalogue download,...
TCT four wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dim...
Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to...
Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to ...
|
|