Ideal for fluting spindles and other decorative turned work. Has a small flat ground on the nose that produces a very fine cut. Suitable for routing false panel mouldings and engraving work. Dimensions: Diameter: 41.5mm Cutting Le...
Complete with one bearing. Dimensions: Diameter: 28.6mm Cutting Length: 15mm Bearing Diameter: 28.6mm Cutting Radius: 8mm Shank Diameter: 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, m...
Decorative panel mould cutter for raised panelling or edge moulding. Dimensions: Diameter: 35mm Diameter: 12.5mm Cutting Length: 9.5mm Cutting Radius: 3.2mm Shank Diameter: 1/2 inch Please note that prices in the Trend Ca...
Panels and frame doors, can be performed with heavy duty routers mounted in fixed positions. This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM and match our range of profile scribers. Suitable for use on natural ...
This cutter is available in set Refs. PDS/10X8mmTC & PDS/11X8mmTC. For stationary machines or portable routers mounted in a table at 22000 RPM recommended speed. Dimensions: Diameter: 45mm Diameter: 11mm Cutting Length: 14mm Cu...
Trend Modern Panel A=3í (Tct Router Cutter Range / Panel Mould Raised) A modern style attractive panelling cutter on 8mm shank. For stationary machines or portable routers mounted in a table at 22000 RPM recommended speed. Dimensions...
Decorative tradional panel mould cutter for raised panelling or edge moulding. Dimensions: Diameter: 19.1mm Cutting Length: 11.1mm Cutting Radius 1: 3.5mm Cutting Radius 2: 0.8mm Shank Diameter: 1/2 inch Please note that ...
This edge mould can also be used to create panelling effects, when using the whole width of the cutter. Dimensions: Diameter: 22mm Diameter: 10mm Cutting Length: 15mm Cutting Radius: 9mm Shank Diameter: 1/4 inch Please no...
Shape approximately equivalent to Ref. 18/80X1/2TC. Suitable panel mould for use with Ref. PSC/5X1/2TC & PSC/50X1/2TC. Ideal for use when no variable speed facility is available or when shaped work is not required. When used in a portable m...
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions: Diameter: 1/8 inch Diameter: 3.2mm Cutting L...
|
|