Trend F´Plate Template 17 44.6X171 Round Face plate template for the LOCK/JIG. Dimensions: 44.6 X 171 Round Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those li...
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
This cutter is self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. Dimensions: Diameter=31.8 mm Cutting Length: 15.9 mm Bearing Diameter: 9.5 & 12.7 mm Shank Diameter: 1/2 inch Please note t...
For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Purpose made for stair housing jigs. Left hand. Dimensions: Diameter=25 mm
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions:...
For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Purpose made for stair housing jigs. Dimensions: Diameter=25 mm Angle: 95 de...
Carbon bush for the T10 router. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....
A six piece pack for use by kitchen fitters. The pack comprises of one worktop cutter C153DX1/2TC, one biscuit jointer C152X1/2TC, 3 x metal panel connectors and a bag of ten No 20 biscuits. Cutters are tungsten carbide tipped with a teflon coatin...
Replacement phenolic slider for the T11. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....
|
|