Arrow T50 Series top quality 0.050 wire staples to suit: T50, T55, T50PBN, HT50P (up to 12mm only), HTX50, ETFX50, ETF50PBN, CT50K, 5700 AND 8000. The Arrow ARRT50916S T50 Staples Box contains top quality 0.050 wire staples for use with...
Flat narrow crown staples for the 6-CT-10X Cable Tacker. Plastic box of 1000 staples. Size 12mm. ...
Suitable for particularly firm connections, also for thicker materials Appropriate for tackers from AEG, Bosch, Black & Decker, Buama, Esco, Kwb, Lux, Metabo, Novus, Wolfcraft Specifications: Width (B) mm6.0 Thickness (D) mm1.08...
Bosch tacker nails made of hard steel wire with lengths between 16 and 30 mm Width of head depending on machine 1.8 or 2.8 mm Appropriate for tackers from AEG, Bosch, Esco, Kwb, Lux, Mekano, Metabo, Novus, Peugeot, Rocafix, Rocagraf, St...
Stanley SharpShooter Type G heavy-duty staples. Also known as Type: 4 or 11 or 140. Fits Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150 and G11. STA1TRA706T Heavy-Duty Staples have the following specific...
For use with Draper Nailer or Combination Nailer/Stapler and other manufacturers similar machines. Note; The colour dots refer to suitability of machine to nails/staples....
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. ...
Galvanised nails reduce the likelihood of rust or staining Designed for DEWALT 16 gauge nailer ensuring fewer jamming or fitment issues DEWALT brads are made from inspected high quality steel to ensure reliability in performance.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistence to damp environments. 28° Collation Angle Designed for the constructi...
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails ...
|
|