Includes: Diameter mm - 1.0 , 2.0 , 3.0 , 4.0 , 5.0 , 6.0 , 7.0 , 8.0 , 9.0 , 10.0 Length mm - 12.0 , 24.0 , 33.0 , 43.0 , 52.0 , 57.0 , 59.0 , 75.0 , 81.0 , 87.0...
Includes: Diameter mm - 1.0 , 1.5 , 2.0 , 2.5 , 3.0 , 3.5 , 4.0 , 4.5 , 5.0 , 5.5 , 6.0 , 6.5 , 7.0 , 7.5 , 8.0 , 8.5 , 9.0 , 9.5 , 10.0 , 10.5 , 11.0 , 11.5 , 12.0 , 12.5 , 13.0 Length mm - 12.0 , 18.0 , 24.0 , 30.0 , 33.0 , 39.0 , 43.0...
Includes: Diameter mm - 1.0 , 1.5 , 2.0 , 2.5 , 3.0 , 3.5 , 4.0 , 4.5 , 5.0 , 5.5 , 6.0 , 6.5 , 7.0 , 7.5 , 8.0 , 8.5 , 9.0 , 9.5 , 10.0 Length mm - 12.0 , 18.0 , 24.0 , 30.0 , 33.0 , 39.0 , 43.0 , 47.0 , 52.0 , 57.0 , 57.0 , 63.0 , 69.0...
Includes: Diameter mm - 2.0 , 3.0 , 3.0 , 4.0 , 5.0 , 6.0 , 8.0 Length mm - 24.0 , 33.0 , 33.0 , 43.0 , 52.0 , 63.0 , 75.0...
This tank cutter has a straight shank with 3 flats upon it to ensure a positive drive when used in 3 jaw chuck. This tank cutter is suitable for use in a hand held brace or drill stand. The cutting blade is manufactured from heat-treated...
This sdjustable tank cutter has a staight shank with a hardened carbon steel cutter blade and a separate high speed steel pilot drill. Suitable for use on most tank materials, steel, plastic, copper etc and is suitable for use in hand held po...
Monument Turnpin made from solid polypropylene for flaring lead pipe prior to jointing two pipes of equal diameter. Monument 604K Turnpin Size: 50mm (2 in). ...
Brads / nails to fit the Rapid R606 tackers. Made from galvanised steel. Type: 300 (galvanised). Length: 25mm. Quantity: 880....
For use with Draper Staplers and Combination Stapler/Nailer and other manufacturers similar machines. Sold in boxes. Order number of boxes required. (see table)...
Divergent Point Staples with 5/16in crown for use with the T37 wiring cable tacker. Size 5/16 Crown x 1/2 Leg. Box 5000. ...
|
|