Expert Quality , engineer’s pattern long taper punches, manufactured from special air hardened chrome vanadium steel for long life....
Expert Quality , special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered heads....
Nail punches are designed to drive nail heads below the surface of the wood. Square head provides a large striking area which also stops the punch from rolling off the bench. Knurled body with hardened, slightly cupped head. Size. 1/32 in.
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black...
Sets of 26 capital letter stamps manufactured from alloy tool steel, hardened and tempered with a black finish. Packed in plastic box....
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black...
Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Size 5mm (3/16 in). Length 100mm (4 in) ...
Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3.1/2in) long and the diameters of the punches are slightly under the sizes listed. Length: 200mm (8in). Set of all sizes in case: 3mm (...
Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3.1/2in) long and the diameters of the punches are slightly under the sizes listed. Length: 200mm (8in). Size 9.5mm (3/8 in) ...
A well proportioned pin punch, hardened and tempered with knurled finger grip. Length: 100mm (4in). Size 5.5mm (7/32 in) ...
|
|