Lifts and stabilises any dual arm sports bike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional ...
Rear swivelling castors and large saddle to aid positioning under the vehicle. Supplied with one piece handle. Specification: Capacity ... 2 tonnes (2000kg) Lifting range ... &n...
Screw adjustment with easy-to-use spinner nut. Ball bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over 670mm. Capacity: 750kg Minimum Height: 1390mm Maximum Height: 2060mm...
Heavy-duty 7tonne short axle stands. Sturdy welded steel construction for superior safety and strength, which helps prevent distortion and twisting. Large saddles for good load distribution. Supplied with captive pin load support. Suitable for use wi...
Delivered in knock-down form for reduced freight cost. Heavy-duty front and rear castors are on extendable legs to give improved stability, particularly when operating at maximum jib extension of 1930mm. Side pump access with removable handle.
3tonne Capacity and fully certified and approved to comply with VOSA requirements. Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spri...
Telescopic two-stage ram gives a higher maximum lift than the standard range, while keeping the same compact closed height. Cast base with threaded components for easy disassembly. Supplied with 3-piece operating handle. Fitted with carrying handle.<...
Telescopic two-stage ram gives a higher maximum lift than the standard range, while keeping the same compact closed height. Cast base with threaded components for easy disassembly. Supplied with 2-piece operating handle. Fitted with carrying handle.<...
All steel stand with pin and chain load support. Full width V-crutch for safe support of load. Double pin securing for added safety. Manufactured to rigorous safety standards. Proven workshop quality and reliability. Capacity Each: 2.5tonne
Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral...
|
|