Classic style cutter, can be used for moulding, panelling and when reversed, for a scribed joint or rule joint for a drop leaf table. Dimensions: Diameter: 38mm Cutting Length: 17mm Cutting Radius: 6mm Shank Diameter: 1/4 inch <...
Decorative ogee cutter for finishing furniture tops. Dimensions: Diameter: 9.5mm Diameter: 2mm Cutting Length: 8mm Cutting Radius: 2.5mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue download, if...
Single flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Cutter has a narrow neck. Dimensions: Diameter: 3/8 inch Diameter: 9.5mm
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. The depth of cut should be a maximum of 1.0mm per pass. Must not be used in eccentric chucks. This cutte...
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. The depth of cut should be a maximum of 1.0mm per pass. Must not be used in eccentric chucks. This cutte...
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions: Diameter: 1/16 inch Diameter: 1.6mm Cutting ...
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. This cutter has a Solid Carbide insert rather than brazed tip. Han...
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. This cutter has a Solid Carbide insert rather than brazed tip. Han...
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions: Diameter: 1/4 inch Diameter: 6.3mm Cutting L...
Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Dimensions: Diameter: 41.5mm Cutting Length 1: 8mm Cutting Length 2: 8mm Cutting Radius 1: 19mm Cutting Radius 2: 11mm Shank Diam...
|
|