Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release easily. Dimensions: Diameter: 12.7mm Cutting Length: 32mm Overall Length: 80m...
Trend Chamfer ´V´ Groove A=45í X 18mm (Tct Router Cutter Range / Chamfer) Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ideal for imitating ´V´ jointed tongue and groove...
Trend Chamfer ´V´ Groove A=60í 257084 (Tct Router Cutter Range / Chamfer) Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Dimensions: Diameter: 12.7mm Cutting Length 1: ...
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 6000RPM. Dimensions: Diameter: 30mm Overall Length: 57mm
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 6000RPM. Dimensions: Diameter: 35mm Overall Length: 57mm
For coves and part of a rule joint. Solid Carbide insert. Dimensions: Diameter: 1/8 inch Diameter: 3.2 mm Cutting Length: 3/8 inch Cutting Length: 9.5 mm Shank Diameter: 1/4 inch Please note that prices in the Trend C...
For coves and part of a rule joint. Single flute. Dimensions: Diameter: 6mm Cutting Length: 15mm Cutting Radius: 3mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may d...
Ideal for fluting spindles and other decorative turned work. Has a small flat ground on the nose that produces a very fine cut. Suitable for routing false panel mouldings and engraving work. Dimensions: Diameter: 44mm Cutting Leng...
Decorative panel mould cutter for raised panelling or edge moulding. Dimensions: Diameter: 35mm Diameter: 12.5mm Cutting Length: 9.5mm Cutting Radius: 3.2mm Shank Diameter: 3/8 inch Please note that prices in the Trend Ca...
Decorative tradional panel mould cutter for raised panelling or edge moulding. Dimensions: Diameter: 12.7mm Cutting Length: 10.5mm Cutting Radius 1: 2mm Cutting Radius 2: 0.7mm Shank Diameter: 1/4 inch Please note that pr...
|
|