Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing washers. Dimensions: Outside diameter - 25.4m...
Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore. Extra care must be taken when mounting sawblades onto a saw spindle when using bushing washers. Dimensions: Outside diameter - 30mm<...
Designed to protect your investment in the best quality router cutters. The inside contains a foam base with cut-outs to store the cutters. The lid is lined with softer foam to ensure the cutters stay in position. Has two plastic snap catche...
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions: Shank ID - 1/8 inch Col...
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions: Shank ID - 3mm Collet O...
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions: Shank ID - 1/4 Inch Col...
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions: Shank ID - 8mm Collet O...
The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter´s shank. Dimensions: Precision multi-slit one piece 8mm collet Please note that prices in the Trend Catalogue download, if shown belo...
Two part plastic inserts enabling the tidy ducting of computer, telephone and audio cables, through desktops, cabinets and shelving units. Cover plates can be removed to allow plugs to pass through. Dimensions: Size: 60mm - black - pack of ...
Guide bush collar. Collar consists of an aluminium ring, grooved on the inside to take a neoprene ring. This ring grips the spigot of the guide bush, preventing it from working loose while routing. Dimensions: 16mm - 30mm Please n...
|
|