Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents bu...
Cutter for non-ferrous metals. For fine finish and long life. Coolants are required when machining aluminium, ie. wax, mist coolant or an air jet. Solid Tungsten Carbide (STC). Use at speed 12000 - 24000 RPM. Cutter is designed to plun...
Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents bu...
For routing acrylic, this cutter is up-cut spiral two fluted for fine finish. Dimensions: Diameter: 5/32 inch Diameter: 4 mm Cutting Length: 15/32 inch Cutting Length: 14 mm Shank Diameter: 1/4 inch Please note that price...
For routing acrylic, this cutter is up-cut spiral two fluted for fine finish. Dimensions: Diameter: 15/64 inch Diameter: 6 mm Cutting Length: 3/4 inch Cutting Length: 19 mm Shank Diameter: 1/4 inch Please note that prices...
Cutter for machining acrylic & plastics with low melting point. Two flute for fine finish. Solid Carbide and are long lasting for a super fine finish. Downcut helical gives long lasting super fine finish on fine acrylics. Prevents vibrati...
TCT two wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...
TCT two wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...
TCT two wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...
Replacement 10mm groover for the 337X1/2TC. Dimensions: Diameter: 41 mm Kerf=10.0mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Tr...
|
|