Supplied with one bearing. Dimensions: Diameter: 31.8mm Cutting Length 1: 12mm Cutting Length 2: 16mm Bearing Diameter: 9.5mm Angle: 45 degrees Shank Diameter: 1/2 inch Please note that prices in the Trend Catalogue downl...
A bearing guided flat ovolo, giving an attractive edging effect. Dimensions: Diameter: 30mm Cutting Length: 10mm Bearing Diameter: 9.5mm Cutting Radius: 12mm Shank Diameter: 1/2 inch Please note that prices in the Trend C...
This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. 91/10 x 1/2 TC. For stationary machines - 12000 RPM recommended speed. Dimensions: Diameter: 82.7mm Cutting Length: 19mm Bear...
Wide combination moulds for edging table tops and shelves. For stationary machines - 16000 RPM recommended speed. Dimensions: Diameter: 66mm Cutting Length: 20mm Bearing Diameter: 12.7mm Cutting Radius 1: 4.5mm Cutting Radius...
Two bearings are supplied for an optional lower quirk. Larger bearing removes the quirk. Dimensions: Diameter: 35mm Cutting Length: 16mm Bearing Diameter: 12.7mm & 16mm Cutting Radius: 8mm Shank Diameter: 1/2 inch Ple...
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: Diameter: 28mm Cutting Length: 19mm Bearing Diameter: 12.7mm Cutting Radius: 10mm Shank Diameter: 1/4 inch...
Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensions: Diameter: 35mm Cutting Length: 22mm Bearing Diameter: 9.5mm & 12.7mm Cutting ...
Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...
Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...
60 degree Taper Point with slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Not for use with routers and not suitable for masonry work. Dimensions: "Diamet...
|
|