Assortment of router bits with T.C.T. heads to suit most applications. Supplied in display case. Contents: • 3 x straight bits - 6, 12 and 16mm diameter. • 90° ‘V’ groovi...
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carb...
Edge moulding only. Supplied with one bearing. Dimensions: Diameter=25 mm Cutting Length: 25 mm Bearing Diameter: 19 mm Cutting Radius 1: 3 mm Cutting Radius 2: 5 mm Shank Diameter: 1/2 inch Please note that prices ...
A large ogee panel mould cutter for traditional panelled doors. For stationary machines or portable routers mounted in a table at 12000 RPM recommended speed. Dimensions: Diameter=86 mm Cutting Radius: 22 mm Shank Diameter: 12 mm<...
Use for producing mortar grooves and for bevelling applications. Dimensions: Diameter: 41mm Cutting Length 1: 22.5mm Cutting Length 2: 23mm Angle: 45 degrees Shank Diameter: 1/2 inch Please note that prices in the Trend Cata...
A drill bit guide for use with a template to allow 5mm diameter holes to be drilled for shelf supports. Has a drilling depth of 12.7mm with a barrel diameter of 9.5mm. Please note that prices in the Trend Catalogue download, if shown below...
Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions: Diameter=44.7 mm Bearing Diameter: 9.5 & mm Cutting Radius 1: 16 mm Shank Diameter: 1/2 Please note that pri...
This guide bush can be used as a direct fit to the router for general work where absolute accuracy is not the main requirement. Dimensions: 30mm OD Please note that prices in the Trend Catalogue download, if shown below, may differ t...
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions: Diameter: 23/32 inch Diameter: 18.2mm Cutting Length: 21...
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Dimensions: Diameter=10 mm Cutting Length: 25 mm Overall Length: 70 mm Shank Diameter: 1/2 Please note that p...
|
|