Hardened and tempered heavy-duty punch. Manufactured from Chrome Vanadium steel with polished tip. Pin Size: 5mm Length: 225mm...
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch. Size 4.8mm (3/16 in). ...
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch. Size 5.5mm (7/32 in). ...
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black...
This hollow punch is made from carbon steel. It has a ground tapered section with a milled clearway for removing waste materials. It is intended for cutting soft materials such as leather. ...
The Arrow T50PBN Professional heavy-duty tacker gun has an all steel construction with hardened steel working parts and jam resistant mechanism. It has an easy squeeze double leverage operation, a visual staple refill window and over 50 years of t...
Suitable for a wide range of DIY applications including upholstery. Uses 4, 6 and 8mm long light duty staples and is Supplied with 200 x 8mm staples. Staples - Order number of boxes required (1000 staples per box)...
Plier type, hand held for greater manoeuvrability. Designed for reaching into hard to get at places, for stapling from any position or angle. heavy-duty steel construction with deep throat for bagging, sealing and labelling. U...
The Rapid R64 is a lighweight but tough combi tacker, made from heavy-duty ABS with steel interior mechanisms. It has no recoil, and an adjustable driving force to suit hard or softer materials or to assist driving of longer staples and brads...
|
|
