Square section striking head with knurled body and polished ends. Carbon steel hardened and tempered. Contents: 1.5, 2.5, 3.0 and 5.0mm....
Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling. Size 1.5mm (1/16 in). Length 100mm (4 in) ...
A quick and easy way to cut clean square holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black an...
Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum s...
Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3.1/2in) long and the diameters of the punches are slightly under the sizes listed. Length: 200mm (8in). Size 3mm (1/8 in) ...
A well proportioned pin punch, hardened and tempered with knurled finger grip. Length: 100mm (4in). Size 4mm (5/32 in) ...
A well proportioned pin punch, hardened and tempered with knurled finger grip. Length: 100mm (4in). Size 1.5 mm (1/16 in) ...
Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3.1/2in) long and the diameters of the punches are slightly under the sizes listed. Length: 200mm (8in). Size 5mm (3/16 in) ...
The punches have a knurled body to enhance grip and are ideal for making indentations in material to ensure the correct positioning for drilling points. The twist lock wooden tub allows the punches to be removed and replaced very easily <...
|
|
