All-round set comprising seven sizes of tap (taper, secondary and bottoming) and seven HSS drills. Packed in case with display sleeve. Contents: • Taper, secondary and bottoming taps size: 3 x 0.5, 4 x 0.7, 5 x 0.8,...
Die holders are used for securely holding round dies for the clean cutting of external threads. The body and ends are black powder coated, with each end knurled for a comfortable non-slip grip. Size: 20.5mm (13/16 in) ...
A Recoil Tap is used when an existing thread has been damaged or stripped. The tap will form a thread slightly oversize the specified thread size. Size.M8 x 1.25 Pitch. Intermediate ...
Tungsten steel taps and dies. Professional style split dies with machined lead-ins for ease of use and accurate thread cutting. Professional type tap wrench with moving jaw and steel die holder with 3 knurled retaining screws for fine adjustment of d...
This tap is ideally used for machine tapping of threads. It takes the swarf or chips away from the cutting direction. Takes the thread to the bottom of the hole. Mainly used for cutting threads in steel but can be used for other materials....
This hand tap is ideally used after the taper tap in the thread cutting process. Mainly used for cutting threads in steel but can be used for other materials. (Also known as an Intermediate Tap)....
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
This set is ideal for manual hand tapping of threads. Mainly used for cutting threads in steel but can be used for other materials. Set consists: -Taper Tap (First Tap) -Second Tap (Intermediate Tap) -Plug Tap (Bottoming Tap)...
This hand tap is ideally used after the taper tap in the thread cutting process. Mainly used for cutting threads in steel but can be used for other materials. (Also known as an Intermediate Tap)....
This hand tap is ideally used at the end of the thread cutting process. Can also be used for blind holes. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a Bottoming Tap)....
|
|