This is ideal for engraving and decorative panel work. Made with a Solid Tungsten Carbide insert, with two flutes. Dimensions: Diameter: 4.8mm Cutting Length: 12.7mm Cutting Radius: 2.4mm Shank Diameter: 1/4 inch Please n...
This staff bead is ideal for producing nosings and attractive edges. Edge cut only. Dimensions: Cutting Length: 19.1mm Cutting Radius: 5.2mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue download, i...
By raising the cutter, the top quirk is removed. Dimensions: Cutting Length: 13.5mm Bearing Diameter: 9.5mm Cutting Radius: 4mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue download, if shown below...
Use bearing B127A to remove the quirk. Dimensions: Cutting Length: 17.5mm Bearing Diameter: 9.5mm Cutting Radius 1: 6.3mm Cutting Radius 2: 4.8mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue dow...
Small panelling cutters, popular for decorative cupboard doors and furniture embellishments. Dimensions: Diameter: 1/2 inch Diameter: 12.7 mm Cutting Length: 9.5mm Cutting Radius 1: 3.2mm Cutting Radius 2: 4mm Shank Diameter:...
Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Dimensions: Diameter: 9.5mm Cutting Length: 12.7mm Bearing Diameter: 9.5mm Shank ...
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: Diameter: 26mm D2=22mm Cutting Length: 16mm Bearing Diameter: 15.9mm Cutting Radius: 4.8mm Shank Diameter: 1/4 ...
For decorative panel and veining work. Ideal for carving with the Routerlathe. Dimensions: Diameter: 9.5mm Cutting Length: 7.5mm Cutting Radius: 4.8mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalog...
This two wing Tungsten Carbide Tipped slotting cutter is ideal for grooving and rebating operations. A 1/2 inch diameter bearing is supplied with the cutter. Depth of cut (E) can be changed by purchasing alternative bearing sizes. Easy to se...
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the bis...
|
|