Cutter for non-ferrous metals. For grooving and profiling. Coolants are required when machining aluminium, ie. wax, mist coolant or an air jet. Use at speed 10000 - 12000 RPM. Dimensions: Diameter: 6.3mm Cutting Length: 12.7mm
Cutter for non-ferrous metals. For grooving and profiling. Coolants are required when machining aluminium, ie. wax, mist coolant or an air jet. Use at speed 10000 - 12000 RPM. Dimensions: Diameter: 12.7mm Cutting Length: 12.7mm<...
Designed for sash bar window construction. Dimensions: Diameter: 25mm Cutting Length: 12mm Cutting Radius: 6.3mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to...
Can be used to make rule joints or glazing bar joints. Dimensions: Diameter: 30mm Cutting Length: 10mm Cutting Radius: 10mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, ma...
Can be used with radius cutters, to make rule joints. Dimensions: Diameter: 19mm Cutting Length: 11mm Cutting Radius: 4mm Shank Diameter: 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may ...
Classic ovolo cutter. Use with a side fence. Dimensions: Diameter: 35mm Diameter: 12mm Cutting Length: 18mm Cutting Radius 1: 3mm Cutting Radius 2: 13mm Shank Diameter: 1/4 inch Please note that prices in the Trend ...
Classic ovolo cutter. Use with a side fence. Dimensions: Diameter: 38mm Diameter: 11.7mm Cutting Length: 22mm Cutting Radius 1: 4mm Cutting Radius 2: 15mm Shank Diameter: 1/4 inch Please note that prices in the Tren...
Especially designed for routing Corian, which is used in many bathrooms and kitchens. Has a ´Delrin´ sleeve fitted to protect the workpiece. Dimensions: Diameter: 54mm Cutting Length: 25mm Bearing Diameter: 21.8mm Cutting Radiu...
Two rounded corners can be cut simultaneously. By adjusting the assembly of spacers on the arbor, timber between 10mm and 32mm thick can be moulded. Central guide bearing can be removed and fitted above or below the cutters. Dimension...
Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece. The width of workpiece accommodated can be adjusted with spacers. Trimmer blocks have four wings. Life of cutting edges can be extended with larger 26mm bear...
|
|