The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions: Diameter: 25.4mm Cutting Length: 14.3mm Bearing Diameter: 9.5mm & 12.7mm Cutting Radius: 7.9mm Shank Diameter: ...
The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions: Diameter: 28.5mm Cutting Length: 14mm Bearing Diameter: 9.5mm & 12.7mm Cutting Radius: 9.5mm Shank Diameter: 1/...
Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. For stationary machines - 18000 RPM recommended speed. Dimensions: Diameter: 51mm Cutting Length: 24mm
Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. Dimensions: Diameter: 38mm Cutting Length: 16mm Bearing Diameter: 9.5mm & 12.7mm Cutting Radius: 6mm<...
Self guided trimmer with ball bearings, fitted to both shank and nose. Allowing templates to be placed either on top or bottom of the material. Dimensions: Diameter: 3/4 inch Diameter: 19.1mm Cutting Length: 50mm Bearing Diameter: ...
Supplied with two bearings. Larger bearing removes quirk. Dimensions: Diameter: 41.5mm Cutting Length 1: 13mm Cutting Length 2: 13.7mm Bearing Diameter: 12.7 & 19mm Angle: 35 degrees Shank Diameter: 1/2 inch Please not...
Trend B/Guided Cham A=45í X 35.1mm Dia (Tct Router Cutter Range / Chamfer) Supplied with one bearing. Dimensions: Diameter: 35.1mm Cutting Length 1: 12mm Cutting Length 2: 16mm Bearing Diameter: 12.7mm Angle: 45 degrees S...
Two bearings are supplied for an optional lower quirk. Larger bearing removes the quirk. Dimensions: Diameter: 30mm Cutting Length: 13mm Bearing Diameter: 12.7mm & 16mm Cutting Radius: 5mm Shank Diameter: 1/2 inch Ple...
Trend Bevel Trim A=30í X 26mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 30 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.
Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay. Twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of work.<...
|
|