Allows decorative cuts in panels and frames to disguise glue lines. Dimensions: Diameter: 36 mm Angle: 45 degrees Bore=1/4 inch Kerf=6mm Please note that prices in the Trend Catalogue download, if shown below, may differ to ...
Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Can be mounte...
Designed for routing Corian, which is used in many bathrooms and kitchens. Dimensions: Diameter: 22.2mm Cutting Length: 12.7mm Bearing Diameter: 12.7mm 16mm 19mm Shank Diameter: 12mm Please note that prices in the Trend Cat...
Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to...
Neatly cuts grooves on doors or frames to accept Intumescent Strip. For use with seals of 15mm width and 4mm thickness. By using alternative ball bearing diameters, other seal thicknesses can be introduced. For either frame or door applicat...
Trend ´T´ Slotter 40.8mm Dia X 4mm Cut (Tct Router Cutter Range / T Slotters) Heavy duty ´T´ slot cutter for clamping and hanging applications. Dimensions: Diameter: 40.8mm Diameter: 9.7mm Cutting Length: 4mm Shank Diameter:...
Heavy duty ´T´ slot cutter for slat wall. A relief cut is required when used. Dimensions: Angle: 119deg Diameter: 30mm Diameter: 10.5mm Cutting Length: 7mm Cutting Radius: 3mm Shank Diameter: 1/2 inch Please note th...
Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip (Tonk Strip). Dimensions: Diameter: 9.5mm Diameter: 19mm Cutting Length 1: 13mm Cutting Length ...
Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Enables it to...
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions: Diameter: 19/32 inch Diameter: 15mm Cutting Length: 25mm...
|
|