StarNIC   V 1.3
 

Order by: Relevance
Price: Low to High, High to Low

 
Image of Draper Scutch Holding Chisel 25mm x 200mm
 

Draper Scutch Holding Chisel 25mm x 200mm

Octagonal shank chisel with recessed end to accept toothed or plain edge scutches. Supplied with one replaceable comb scutch. Generally in accordance with BS3066:1995...


 
Image of Stanley FatMax Concrete Chisel 3/4" x 12" W/G
 

Stanley FatMax Concrete Chisel 3/4" x 12" W/G

A concrete chisel forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications...


 
Image of Faithfull F0402 Brick Bolster 3" In Wallet
 

Faithfull F0402 Brick Bolster 3" In Wallet

These chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars. Size: 75 x 225mm (3in x 9in) pre-packed. ...


 
Image of Faithfull F0404 Brick Bolster 4" In Wallet
 

Faithfull F0404 Brick Bolster 4" In Wallet

These chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars. Size: 100 x 225mm (4in x 9in) pre-packed. ...


 
Image of Faithfull Scutch Combs 2" Box Of 25
 

Faithfull Scutch Combs 2" Box Of 25

These Faithfull Scutch combs fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. The Faithfull FAISC2BULK Scutch combs come in a box of 25 and ...


 
Image of Draper 60mm Electricians Bolster Chisel With Hand Guard
 

Draper 60mm Electricians Bolster Chisel With Hand Guard

Ground cutting edges and octagonal shank. Fitted with impact absorbing hand protection grip. For levering up and cutting through the tongues and grooves of floorboards. Generally in accordance with BS3066:1995...


 
Image of Roughneck Cold Chisel with Grip 1" x 18"
 

Roughneck Cold Chisel with Grip 1" x 18"

Hardened and tempered steel, hexagonal shank a sand blast finish with a polished tip and domed and chamfered striking face. Ergonomically designed grip made from strong PVC material for protection against glancing blows and for shock absorbi...


 
Image of Roughneck Safety Grip for 19mm Shank
 

Roughneck Safety Grip for 19mm Shank

Double injected, soft feel, safety grip for protection and comfort. ...


 
Image of Draper 3 Piece Bolster, Cold Chisel & Hammer Set
 

Draper 3 Piece Bolster, Cold Chisel & Hammer Set

Kit comprising of 1kg club hammer with striking face accurately ground, polished, tempered and hardened, fitted with FSC approved straight grained hickory shaft. 75mm bolster and 25mm cold chisel manufactured to BS3066: 1995. Display packed Co...


 
Image of Fisher F1110LMR Steel Roofing Square 400 x 600mm (16 x 24")
 

Fisher F1110LMR Steel Roofing Square 400 x 600mm (16 x 24")

High quality, heavy-duty roofing square suitable for both the DIY enthusiast and the craftsman. Stamped with Imperial graduations on one face and metric on the other. Made from steel. Size 400 x 600mm (16 x 24 in) ...





Online Shopping Price Comparison UK © StarNIC 2016 - 2024 All rights reserved.

Designated trademarks brands Logos and certain artworks used
on StarNIC.net are the property of their respective owners.