Bearing guided for straight or curved work. For portable and stationary routers. Supplied as standard with Ref. BR/191 fitted. A variety of alloy bearing rings are available to give various rebate sizes. Rings are secured between the two bearings....
TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Will plunge and clear chips to a depth of 70mm in a number of...
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our...
Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 11.1 • Overall...
Self guided tools for trimming inlay or overlaps. Specifications • Shank Diameter: 1/2 • Dia Metric: 28.6 • Dia Imperial: 1 1/8 • Cut Length Metric: 38.1 • Cut Length Imperial: 1 1/2 • Overall Length Metric: 92 • Bearing...
Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric:...
With plunge cut these cutters can be used to cut and mould hand holes in stool seats. Specifications • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 28 • Overall Length Metric: 87.6 • Radius 1 Metric: 17.5
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by...
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our...
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Designed to trim surface to an undermount bowl. Specifications • Shank Diameter: 1/2 • Dia Metric:...
|
|