A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. Specifications • Shank Diameter: 3/8 • Dia Metric: 28 • Dia2 Metric: 9.5 • Cut Length Metric: 8 • Overall Length Metric: 60
For panel and veining work. Ideal for barley twists using the Routerlathe. Specifications • Shank Diameter: 1/4 • Dia Metric: 27 • Dia Imperial: 1 1/16 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length...
Supplied with two bearings. The larger bearing removes the bottom quirk. Specifications • Shank Diameter: 1/2 • Dia Metric: 63 • Cut Length Metric: 20 • Overall Length Metric: 79 • Bearing Dia Metric: 9.5 • Bearing Dia...
For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass. Suitable for straight panels only. Specifications • Shank Diameter: 1/4 • Dia Metric: 28 • Dia Imperial: 1 7/64 • Dia2 Metric: 9.5 • Cut...
Has three flutes, and has bevelled corners to prevent scoring, and is for flush trimming of hardwood or plastic edge strip. Specifications • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 12 • Overall Length Metric: 44.5...
Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. Specifications • Shank Diameter: 1/4 • Dia...
Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component. Specifications • Shank Diameter: 1/2 • Dia Metric: 53 • Dia2 Metric:...
For trimming top & lip. Economical cutters, perform 3 functions: 1. To top trim the overlay at 90 degrees. 2. To trim the overlay at 45 degrees or 60 degrees. 3. The base of the cutter can trim the vertical lipping at 90 degrees. Requires side fence...
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling....
A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. Specifications • Shank Diameter: 1/4 • Dia Metric: 24.6 • Cut Length Metric: 18.5 • Overall Length Metric: 58 • Bearing Dia Metric:...
|
|