These countersinks are produced in High Speed Steel (HSS) and should not be confused with carbon steel types. They are designed for countersinking mild steel, iron and plastics. Multi flute design. Ground shank for greater running accuracy. Specifications...
This quarter radius can produce a sunk bead or a nosing mould. Requires a side fence for guidance. Specifications • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Length Metric: 58.5 • Radius 1 Metric:...
For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric: 56 • Bearing Dia Metric: 12.7 • Angle: 60
A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only cut up to...
Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Specifications • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 10 • Cut Length Imperial: 25/64 •...
A self guiding flat ovolo to give a smooth corner finish. Alternatively, can be used to produce glazing bar profiles. Specifications • Shank Diameter: 1/4 • Dia Metric: 30 • Cut Length Metric: 11 • Cut Length Imperial: 7/16 •...
Ideal for posts and newel caps for stairs. Specifications • Shank Diameter: 1/4 • Dia Metric: 30.9 • Cut Length Metric: 22.2 • Overall Length Metric: 74.5 • Bearing Dia Metric: 12.7 • Angle: 67.5
A quarter ellipse cutter for architraves and mould finishes. For stationary machines - 12000 RPM recommended speed. Specifications • Shank Diameter: 1/2 • Dia Metric: 69.2 • Cut Length Metric: 16 • Overall Length Metric: 78.5 •...
Template thickness should be 5mm thicker than cut length of cutter. Specifications • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 32 • Overall Length Metric: 80 • Bearing Dia Metric: 19 • Radius 1 Metric: 9.5
With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall...
|
|