To increase gluing area producing a strong joint in drawer production. Specifications • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric:...
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Suitable for Trend Hinge & Lock Jigs. Specifications...
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks....
These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Specifications • Shank Diameter: 1/2 • Dia Metric:...
Ideal for speaker cabinets and drawer construction. Please note. This tool cannot be re-sharpened. Inverted use only. Use on MDF and natural timbers. Specifications • Shank Diameter: 1/4 • Dia Metric: 42 • Cut Length Metric: 14.3...
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. Specifications • Shank Diameter: 1/4 •...
The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be used to give various profiles. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 •...
These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut...
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric: 19 • Overall Length Metric: 61 • Bearing...
Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Ref. C174 can be used with the Trend Shelf Support Template. For drilling machines or routers. Specifications • Shank Diameter: 8 mm • Dia Metric: 5...
|
|