Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Specifications • Shank Diameter: 1/4 • Dia...
The two bearings supplied offer the means of cutting different depths of mouldings. Specifications • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length...
For creating a concave radius or cove in the edge of furniture and columns. Specifications • Shank Diameter: 1/4 • Dia Metric: 22.7 • Dia Imperial: 57/64 • Cut Length Metric: 10 • Cut Length Imperial: 25/64 • Overall Length...
For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. For No8 & No10 screw heads. Not suitable for grooving applications. Specifications • Shank Diameter: 1/4 •...
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling....
For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 9 • Cut Length Imperial: 23/64 • Overall...
This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled. Specifications • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 16 • Overall Length Metric:...
Four fluted cutter for routing tenons with a clean finish on the shoulder. Tungsten Carbide Tipped for use on timber and abrasive man-made boards. Cutter has four cutting edges with two down-shear blades for the shoulder and two up-shear for the face...
Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature stops break out on top edge. Has a 3 degree shear....
Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifications • Shank Diameter: 1/4 • Dia Metric: 13 • Dia2 Metric: 19 • Cut Length Metric:...
|
|