These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications • Shank Diameter: 1/4 • Dia Metric: 15 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 53 •...
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/2 • Dia Metric: 60 • Cut Length Metric: 27 • Overall Length Metric: 65.1 • Radius 1 Metric: 20
Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.9 • Dia2 Metric: 28.6 • Overall...
To create profiles on face or edge of drawer fronts and cabinet doors. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 14 • Cut Length Imperial: 35/64 • Overall Length Metric:...
Classic skirting board mould. Specifications • Shank Diameter: 1/2 • Dia Metric: 37 • Cut Length Metric: 40 • Overall Length Metric: 89 • Bearing Dia Metric: 16 • Radius 1 Metric: 13.5
These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table shows angles from the horizontal and the profiles show...
Heavy duty arbor with spacers for 12mm bore slotters with or without bearings. Specifications • Shank Diameter: 1/2 • Dia Metric: 18.5 • Overall Length Metric: 84.5 Contents: 1 x Arbor 2 x Spacer 10 mm 1 x Spacer 1/4 inch 5 x Spacer...
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by...
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications • Dia Metric: 50 • Sawbore: 12 • Saw Kerf Metric: 8 • Saw Teeth:...
For dovetail joints and sliding dovetails. Can be used with Ref.10/40 butterfly 14 degree spline cutter. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 10 • Cut Length Imperial:...
|
|