These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used. Specifications...
Supplied with extra 1/2 inch bearing for removing the lower quirk. Specifications • Shank Diameter: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Bearing Dia Metric: 9.5 • Bearing...
Two flute for fine finish. Specially ground for cutting acrylic. Can be used on phenolic resin. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Cut Length Imperial: 1...
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications • Shank Diameter: 1/4 • Dia Metric: 29 • Cut Length Metric: 15.8 • Overall Length Metric: 52.9 • Bearing Dia Metric:...
A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No.8 & No.10 screw heads. Not suitable for grooving applications. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia2 Metric: 4.5 • Cut Length Metric:...
They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous or non ferrous metals....
For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is required...
Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 14.3 •...
Especially designed for routing Corian which is used in many bathrooms and kitchens. For trimming bowls, trepanning and face milling. Can also be used for trimming and face milling of timber. Specifications • Shank Diameter: 1/2 • Dia Metric:...
3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb. Specifications • Shank Diameter: 1/2 • Dia Metric: 24.2 • Cut Length Metric: 50 • Overall Length...
|
|