Craft Pro 30mm to 16mm reducing bush - for saw blades 1.5mm thick 30mm outside diameter reducing washer with 16mm internal bore. Allows 30mm bore blades with 1.5mm thick plates to be fitted to compatible saws with 16mm spindle fittings. For use with...
Trend Snappy Drill Bit Guide - for No12 Gauge Screws The perfect accessory for making centralised pilot holes when fitting countersunk hinges and other ironmongery. With its bevelled nose design, the Drill Bit Guide automatically self centres when positioned...
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications • Cut Length Metric: 5 • Bearing Dia Metric: 29 • Sawbore: 12
Trend Craft Pro 1/2in shank bearing guided biscuit cutter - 37.2mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. Supplied with three interchangeable bearings covering biscuit...
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.9 • Dia2 Metric: 28.6 • Cut Length Metric: 22.5 • Overall Length Metric:...
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications • Dia Metric:...
Trend Craft Pro 1/4in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. Bearing guide ensures the correct 4mm depth...
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric:...
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 31.7 • Overall Length Metric: 71 • Radius 1 Metric: 16
Trend Craft Pro 1/4in shank bearing guided round over router cutter - 1/8in radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/8in imperial radius...
|
|