TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diameter: 1/4 • Dia Metric: 10 • Dia Imperial:...
3/4" accessory connector made from brass, suitable for use with garden hose, sprinklers and taps. Features and Benefits • Connectors made from brass • Suitable for use with garden hose, sprinklers and taps Contents 1 x Brass Accessory Connector,...
An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications • Shank Diameter: 1/2 • Dia Metric: 45 • Dia2 Metric: 24 • Cut Length Metric: 17 • Overall Length Metric: 60 • Radius 1...
This powerful 161cc tiller and cultivator is suitable for any soil type, breaking up compacted ground with ease. It is ideal for preparing garden seeding beds, vegetable patches and work in small holdings and allotments. The 4-stroke petrol engine features...
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads...
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. ...
Fitted with fully hardened, tempered and polished steel ferrule and tines, which are fixed to a plastic handle attached with a leather wrist strap Contents 1 x Stainless Steel Weeding Fork
Eight pattern gun with trigger grip handle and reservoir to hold liquid soap. Reservoir holds 100ml/3.1/2 oz of liquid with control button to alter mix. Ideal for washing cars. Nozzle can be adjusted to give eight patterns: shower, mist, cone, rinse,...
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diameter: 1/2 • Dia Metric: 44.5 • Dia Imperial:...
Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 23 • Dia2 Metric: 20 • Overall...
|
|