Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications • Cut Length Metric: 9 • Bearing Dia Metric: 39 • Sawbore: 12
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling....
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check...
Can be used with a majority of routers on the market. The bar fits into one of the the holes for the router side fence. They have a pivot point which is adjustable in height.
Ovolo cutter designed for sash bars but useful for decorative edging. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric:...
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads...
Trend Craft Pro 1/4in shank straight router cutter - 2mm diameter solid carbide insert Two flute solid carbide insert for increased strength, offering cleaner cutting edges and fast clearance of waste. 2mm diameter X 5mm cutting depth with bottom cut...
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 •...
Bearing guided tool to rout stepped groove for espagnolette lock recess. Two flute for clean finish. Specifications • Shank Diameter: 1/2 • Dia Metric: 40.05 • Cut Length Metric: 16.3/12.3 • Overall Length Metric: 85 • Bearing...
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 4 • Saw Teeth: 4
|
|