The two bearings supplied offer the means of cutting different depths of mouldings. Specifications • Shank Diameter: 1/4 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 14 • Overall Length Metric: 52 • Bearing...
Shape similar to Ref. 18/80. Suitable panel mould for use with Ref. PSC/5 & PSC/50. Specifications • Shank Diameter: 1/2 • Dia Metric: 28.5 • Cut Length Metric: 38 • Overall Length Metric: 76 • Angle: 75
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be handled with care to avoid breakage. Single flute...
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diameter: 1/4 • Dia Metric: 13 • Dia Imperial:...
Versatile cutter, using all or part of the cutter. Specifications • Shank Diameter: 1/4 • Cut Length Metric: 24 • Overall Length Metric: 72 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications • Shank Diameter: 1/2 • Dia...
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications • Shank Diameter: 8 mm • Dia...
Versatile cutter, using all or part of the cutter. Specifications • Shank Diameter: 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 65.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial:...
For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56.7 • Radius 1 Metric: 4
These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Specifications • Shank Diameter: 3/8 • Dia...
|
|