Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. Specifications • Shank Diameter: 1/4 •...
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check...
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications • Shank Diameter: 8 mm • Dia...
Trend Craft Pro 1/2in shank straight router cutter - 9/16in diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. With bottom cut feature for general...
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications • Shank Diameter: 1/2 • Dia...
These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 1/4 • Dia Metric: 6 • Cut Length Metric: 15 • Overall Length Metric: 59 •...
High performance multi material long life Mesh abrasive for 125mm Random Orbit sanders Suitable for wood, paint, plaster and metal SILICON CARBIDE GRIT Extra-hard super durable grit for long life enhanced performance on all materials 125mmm DIAMETER...
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Ideal for cutting kitchen worktops. TC tips are ground with greater clearance for...
Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before...
High performance multi-material long life Aluminium Oxide abrasive for 125mm Diameter Random Orbit Sanders. Suitable for wood, paint, plaster and metal SUPERIOR DUST EXTRACTION Elongated hole pattern ensures base compatibility and aids maximum extraction...
|
|