Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Can be used for 10mm dowels. For drilling machines or routers. Specifications • Shank Diameter: 1/4 • Dia Metric: 10 • Cut Length Metric: 35 •...
Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll...
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 31.7 • Overall Length Metric: 70 • Radius 1 Metric: 25.4
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 9.5 • Saw Teeth: 4
These cutters are for Trend Craft Dovetail Jigs. Specifications • Shank Diameter: 12 mm • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric: 65 • Angle: 97
Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before...
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass....
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diameter: 1/4 • Dia Metric: 10 • Dia Imperial:...
These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications • Shank Diameter: 1/2 • Dia Metric: 42.9 • Cut Length Metric: 40 • Overall Length Metric: 78 • Overall Length Imperial: 3 5/64...
For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 16 • Cut Length Metric: 19.5 • Overall Length Metric: 51 • Radius 1 Metric: 8
|
|