V point through hole slow spiral TCT drills can be used in drilling machines or portable routers. Tungsten Carbide Tipped for long life. Router drilling ensures hole is perpendicular to surface. Specifications • Shank Diameter: 1/4 • Dia...
Template thickness should be 5mm thicker than cut length of cutter. Specifications • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 11 • Overall Length Metric: 55 • Bearing Dia Metric: 19 • Radius 1 Metric: 9.5
Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 28 • Dia2 Metric: 25.7 • Cut...
Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Ideal with delicate applications such as musical instrument production,...
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 •...
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/2 • Dia Metric: 22 • Dia2 Metric: 12 • Cut Length Metric: 12 • Overall Length Metric: 50.1 • Radius 1 Metric: 5
Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Has twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of work....
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. ...
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: 11 • Cut Length Metric: 5 • Overall Length Metric: 52.5 •...
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 19 • Overall Length Metric: 71 •...
|
|