Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check...
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications • Shank Diameter: 1/4 • Dia Metric: 22.3 • Dia Imperial: 7/8 • Dia2 Metric: 20 • Cut Length Metric: 14 • Cut...
High performance multi material long life Mesh abrasive for 125mm Random Orbit sanders Suitable for wood, paint, plaster and metal SILICON CARBIDE GRIT Extra-hard super durable grit for long life enhanced performance on all materials 125mmm DIAMETER...
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass....
A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only cut up to...
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Specifications • Shank Diameter:...
Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction. Specifications • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Length Metric: 48.6 • Radius 1 Metric: 10
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 11 • Saw Teeth: 4
To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. Specifications • Shank Diameter: 1/4 • Dia Metric: 18 • Dia Imperial: 45/64 • Cut Length Metric: 16 • Overall...
Ideal panelling cutter for kitchen or cabinet doors. Specifications • Shank Diameter: 1/2 • Dia Metric: 73 • Cut Length Metric: 22 • Overall Length Metric: 67 • Radius 1 Metric: 50
|
|