These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Specifications • Shank Diameter: 8 mm • Dia Metric:...
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diameter: 1/4 • Dia Metric: 14 • Dia Imperial:...
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter. Specifications • Shank Diameter:...
Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Ref. C174 can be used with the Trend Shelf Support Template. For drilling machines or routers. Specifications • Shank Diameter: 8 mm • Dia Metric: 5...
This quarter radius can produce a sunk bead or a nosing mould. Requires a side fence for guidance. Specifications • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Length Metric: 58.5 • Radius 1 Metric:...
These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut...
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass....
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications • Shank Diameter: 8 mm • Dia...
Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. Specifications • Shank Diameter: 1/4 • Dia Metric: 18 • Cut Length Metric: 15 • Overall Length Metric: 65
Designed for sash bar window construction. Specifications • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Length Metric: 60 • Radius 1 Metric: 10
|
|